Download User Manual - Klockner Moeller Parts

06/03 AWB2528-1480GB
Commissioning
Testing the circuit diagram
X Switch to the main menu and select the STOP RUN menu
PROGRAM...
option.
With a tick at RUN or STOP you switch to the RUN or STOP
operating modes.
STOP å RUN
PARAMETERS
SET CLOCK...
MFD runs in the mode indicated by the tick.
X Press
h
the OK button. MFD will change to RUN mode.
The mode assigned the tick is always active.
The Status display shows the current mode and the
switching states of the inputs and outputs.
I 12..........
I
MO 14:42
Q 1.......
P-
RUN
X Change
to the Status display and press pushbutton
actuator S1.
The contacts (boxes) for inputs I1 and I2 are activated and
relay Q1 picks up. This is indicated on the numbers which are
displayed.
Power flow display
MFD allows you to check circuit connections in RUN mode.
This means that you can check your circuit diagram via the
built-in power flow display while it is being processed by the
MFD.
X Change
to the Circuit diagram display and press
pushbutton actuator S1.
The relay picks up. MFD shows the power flow.
I 01====I 02===================Ä Q 01
L: 1 C:1 RUN
Figure 56: Power flow display: Inputs I1 and I2 are closed, relay Q1
has picked up
= visible area
86
For Immediate Delivery call KMParts.com at (866) 595-9616