Download Operation Manual
Transcript
G-859 Mining Mag • • • • • • • • • • • • • • • • Operators Manual Continuous surveying, where the unit automatically records data at a user-selectable rate, up to 5 readings per second (Note: Newmont rate is 10 Hz). Integrated NovAtel Smart Antenna™ GPS system is preconfigured, Lat/Long data recorded simultaneously with the magnetic data. Used to produce a located survey map and exportable interpolated data set using the supplied MagMap2000 program. Audible tone indicating goodness of GPS fix Discrete surveying option where the unit takes a reading upon an operator key-press. Four modes of operation: search mode, for performing a random search for anomalies or system test; simple survey, for a simplified method of operation with Line and Station marking; mapped survey, for the full capability of defining X-Y location and tracking position as readings are taken; and base station, for collecting data to be used for diurnal corrections. Real-time analog waterfall display of the current magnetometer reading. Up to five separate surveys may be stored independently for up to 6 to 8 hours of recorded data with GPS. Map display showing the X-Y survey area, with readings plotted in the correct X-Y locations. Data profile displays, allowing previous data to be reviewed on line by line basis. Data editing capability, where data may be deleted and retaken. Downloading of data in compressed format to a host PC. MagMap2000 software for editing data positions, GPS positions, doing diurnal corrections, filtering, de-spiking, de-striping and drawing profiles and contour maps. Writing a out a file for plotting profiles and surface contours with Geometrics or 3rd party software, such as MagPick, Surfer or GeoSoft. Audible tones indicating the field change over the local target, warning of non-valid data, indicating that data was taken and stored, and that location keys have been pressed. Storage capacity for more than 250,000 readings and positions, each recorded with the time of the event and position, including externally logged GPS positions. Logging of user-defined field notes. Modes of Operation Here we present an overview of the modes of operation, along with their advantages and when each should be used. GPS Survey Mode Used in conjunction with either Simple Survey or Mapped Survey mode described below, the magnetometer receives GPS transmissions at regular intervals (typically every 1 second) and stores those positions along with the magnetometer data acquired at a 1, 2 or 5 Hz rate. When downloaded into the supplied MagMap2000 program, the GPS positions are interpolated so that each magnetometer reading is assigned a GPS position. GPS data reception is signaled by a blinking RS-232 display box. Search Mode In Search mode, the magnetometer operates normally, displaying an analog oscilloscope-like trace, with an audible sound whose pitch indicates changes in the field reading (the "woowee" indicator). However, data is not stored in memory. This is useful for manually identifying anomaly locations, much as with a metal detector. It is also useful to check for proper sensor operation, ambient magnetic noise and the magnetic cleanliness of survey operator accessories such as shoes, belt buckles, keys etc. Simple Survey Mode This is the recommended mode for use with the Novatel GPS. In simple survey mode, the unit keeps track of MARK (start line, and waypoints) and END LINE (end of line) key presses, and the direction of each line. This allows a full and complete survey. Later, after downloading the data into the PC, the MagMap2000 program will attach an x and y coordinate to each reading. Simple survey mode allows the simplest operation of the G-859, enabling the operator to easily assign X-Y positions in the supplied MagMap2000 software. You must manually keep track of where you are taking data, and enter this information into the host software to locate the readings. 2