Download Operation Manual
Transcript
G-859 Mining Mag Operators Manual Chapter 12: MagMap2000 Software The MagMap2000 software program provides the G-859 user with data downloading and editing capability. Acquired data is downloaded via high speed RS-232 communications link and then manipulated to generate or edit interpolated X-Y or GPS position information. A primary application included is the ability to apply diurnal correction from a base station. This requires secondary base station data file with overlapping date and time information. Editing functions include shifting lines, changing the direction of lines, appending or cutting lines, deleting or inserting segments of lines or entire lines. Also included are data clean up routines including the ability to remove zero “drop outs”, spikes and apply spline high pass or low pass filtering. The program offers a de-striping wizard (heading error correction) and has an interpolator wizard to enable construction of interpolated data files (can make a mag-GPS file from GPS-Time and Mag-Time files). The resulting data can be plotted a profiles on the PC as a quality control measure and to assure coherence between the original acquisition parameters and the final locations. In addition the program provides simple gridding, contouring and plotting (printing) of the positions, track plots and magnetic contour maps. The data can be exported in formats compatible with Surfer for Windows (*.DAT) or Geosoft OASIS (*.XYZ). Because of the power and complexity of the MagMap2000 program, its operation will not be covered here. Please refer to the MagMap2000 Manual (available on the Magnetometer CD shipped with the magnetometer system) for complete instructions on the use of the program. Also note that the MagMap2000 Manual, the MagMap2000 program and this manual are available on our web site www.geometrics.com under Downloads, FTP, PUB, MAG. We recommend that you regularly visit our site for the latest software upgrades. 80