Download Installer manual

Transcript
4 Pipe and ventilation connections
General pipe connections
Pipe installation must be carried out in accordance with
current norms and directives.
Dimensions and pipe connections
Lowest permitted temperature on incoming brine is -8
°C.
Pipes and other cold surfaces must be insulated with
diffusion-proof material to prevent condensation.
Symbol key
Symbol Meaning
100
Venting valve
Shut-off valve
Non-return valve
72
Control valve
Shunt / shuttle valve
408
Safety valve
Temperature sensor
P
Pressure gauge
Circulation pump
Particle filter
Compressor
32
320
Heat exchanger
38
58
8
Chapter 4 | Pipe and ventilation connections
NIBE FLM