Download CAUTION - Plantec Distribuidora

Transcript
6.2.1 Camera Movement Setup
1) Setting of movement detection domain Designate position by clicking or dragging mouse on the image in order to
check if movement occurs on the camera input image.
Set the entire domain of screen to the movement detecting domain.
Cancel the movement detecting domain designated on the screen.
2) Movement detection sensitivity setup
It is possible to adjust sensitivity by clicking slide bar with mouse.The value set when shipping system is the most proper
sensitivity.
If you need to check of sensitivity, select “Output Motion Area”check box and press “Save”. Then detected movement
area display blue color blocks.
3) Movement detecting event setup
If movement is detected when setting movement detection domain, the set event can be carried out.Beep Out :