Download PLPADFM2B - MCM Electronics

Installation:
1. Set up the car mount suction cup on the windshield or any other smooth surface in the car.
Just hold it in the position you want and lock it.
2. Connect the car charger and the unit through the mini USB socket.
3. Place your iPod/iPhone/iPad into the holder; adjust the flexible clamp by pressing the
crandle lock release button.
4. Turn on your car radio and turn to a bare FM channel. Then press the CH+/CH- buttons
beside the display to set the frequency of the fm transmitter the same as that of the radio.
Then it will automatically play the music from your devices.
Note: USB charger slot can charge your mobile phone and other digital players only
when no iPod/iPhone/iPad is connected to the device.
Set up Bluetooth:
1. Make sure your phone has Bluetooth turned on and is in discovery mode. (On iPhone, this
can be found under Settings > General > Bluetooth.)
2. Press and hold the green phone button on your PLPADFM2B.
3. Your PLPADFM2B will appear in the list of available Bluetooth devices as “B-368BT”.*
4. Pair your phone with the Bluetooth device. Your phone’s name will appear on your
PLPADFM2B.
5. You can now make phone calls using your car’s stereo system as a speaker. Enjoy!
* Subject to change.