Download C-Tech HD 5000C+_Eng

Transcript
6.1 Getting Started
6.1 Getting Started
ᶀ Blind Scan <Figure 6.1.7>
ᶀ Package Identifier (PID) Scan <Figure 6.1.9>
⊹ Select a transponder.
⊺ Press
/
to set the “Polarization” and “Scan Mode” options. - Polarization :
Select Vertical / Horizontal / All.
- Scan Mode : Select Fast / Detail.
⊺ To change a transponder’s information (Frequency, Symbol Rate), use the
NUMERIC buttons.
CH
CH
⊻ SCAN : Begin channel search of the selected satellites.
⊻ To add a new transponder, press the GREEN button.
⊼ To delete a transponder, press the YELLOW button with the cursor next to the
Frequency parameter.
ᶀ Manual Scan <Figure 6.1.8>
⊽ To search a transponder, set its different parameters and press
/
. You can
search a specific channel of the transponder by setting its PID data (Video, Audio
and PCR).
CH
⊹ Select a transponder.
⊺ To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
CH
⊻ To add a new transponder, press the GREEN button.
⊼ To delete a transponder, press the YELLOW button with the cursor next to the
Frequency parameter.
⊽ To search a transponder, set its different parameters and press
.
<Figure 6.1.9>
ҫ Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
<Figure 6.1.7>
<Figure 6.1.8>
16
17
English
⊹ Select the satellites you want to search by pressing the button on the remote.