1
Download SPAN-SE User Manual - Borealis Precision
Transcript
H.1 Disassemble the SPAN IMU Enclosure The SPAN IMU disassembly steps are as follows: 1. Remove the top cover’s six bolts using a hex key, as shown in Figure 72: Figure 72: Bolts and Hex Key 2. Set aside the bolts with their sealing washers. 3. Lift the top cover off the tube body and set it aside. 4. Lift the tube body away from its base plate and set it aside, as shown in Figure 73 on page 392. SPAN-SE User Manual Rev 7 391
