Download Installation AK103

4
Door Locking System Wiring
4.2 Positive & Positive/Negative Triggered Door Locking System
Use two additional relays and connect the wires according to the following
figure:
+12V
+12V
+12V
+12V
Green (-)LOCK
From Controller Unit
Green (-)LOCK
From Controller Unit
Vehicle LOCK
Signal Wire
+12V
Vehicle LOCK
Signal Wire
+12V
Blue (-)UNLOCK
From Controller Unit
Vehicle UNLOCK
Signal Wire
Blue (-)UNLOCK
From Controller Unit
Positive Triggered
Vehicle UNLOCK
Signal Wire
Positive and Negative Triggered
4.4 Vacuum Type Door Locking System
If vehicle has vacuum type door locks, use two additional relays and
connect the wires according to the following figures:
+12V
To Central
Vacuum
Lock System
+12V
+12V
Green (-)LOCK
From Controller Unit
+12V
Blue (-)UNLOCK
From Controller Unit
+12V
Green (-)LOCK
From Controller Unit
Vehicle LOCK
Signal Wire
To Central
Vacuum
Lock System
Vehicle LOCK
Signal Wire
+12V
Vehicle UNLOCK Lock/Unlock
Signal Wire
Panel
Blue (-)UNLOCK
From Controller Unit
Vacuum Type: Lock(-),
Unlock(+)
Vehicle UNLOCK Lock/Unlock
Signal Wire
Panel
Vacuum Type: Lock(+),
Unlock(-)
7