Download RAIDExpress 133 RAID

RAIDExpress 133 RAID USER MANUAL
Setup Array for RAID 0:
The RAIDExpress 133 card allows you to use two, three or four hard drives to set a
RAID 0 (stripe) array. All the hard drives attached on the controller will be set as array
0. When you create a striped array, files are broken into 64k (stripe size) and stripes
are sent to each disk in the array. Selecting RAID 0 can increase data transfer rate
and allow the best overall performance characteristics because of giving up
redundancy.
RAID 0
Disk Controller
1
5
9
13
2
6
10
14
Primary Primary
Master
Slave
3
7
11
15
4
8
12
16
Secondary Secondary
Master
Slave
17