Download PCI-760
Transcript
3. Safety Instructions 3. Safety Instructions 3.1. Safety Instructions for the Lithium Battery The PCI-760 board is equipped with a Lithium battery. For the replacing of this battery please observe the instructions described in the chapter 9.1.5.1 ”Replacing the Lithium Battery”. Caution! Danger of explosion when replaced with wrong type of battery. Replace the battery only with UL recognized Lithium battery that has the same or equivalent type recommended by Kontron. Do not dispose of lithium batteries in domestic waste. Dispose of the battery according to the local regulations dealing with the disposal of these special materials (e.g. to the collecting points for the disposal of batteries). 3.2. Basic Safety and EMC Compatibility The PCI-760 board is a fixed component that shall be installed into a stationary system by applying good engineering practices and respecting the information on the intended use of the components with a view to meeting the protection requirements [refer to (a) and (b)]. The PCI-760 board was designed and manufactured, having regard to the state of the art, as to ensure that: (a) the electromagnetic disturbance generated does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended; (b) it has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use. The PCI-760 board was designed, manufactured and checked according to the basic safety requirements in the scope of the low-voltage (LVD) directive. PCI-760 – User’s Guide (V1.10) 5