Download Desktop 3D Printer

1 INTRODUCTION
1
Introduction
The 3DMakerWorld Artifex (Figure 1.1) is an open source desktop 3D printer. It makes
three-dimensional objects out of PLA and ABS filaments layer by layer. The printer’s frame
is based on the frame of MendelMax-2.0, and the design was heavily modified for printability, strength, wire management, vibration reduction, filament feeding, and compatibility
with other features in the extruder and heated build platform (HBP). The printer uses an
MakerGear hot-end and its compact extruder design. A durable 24v silicone rubber heater
is used in the HBP to achieve fast heating-up. The design of 3DMakerWorld Artifex 3D
Printer is open to the public under the Creative Commons Attribution-ShareAlike 3.0 Unported license (CC BY-SA 3.0).
Figure 1.1: The 3DMakerWorld Artifex 3D printer
http: // 3dmakerworld. com
3