Download Web Server Module User`s Manual

• SAFETY PRECAUTIONS •
(Be sure to read these instructions before using the product.)
Before using this product, read this manual and the relevant manuals introduced in this manual carefully
and handle the product correctly with full attention to safety.
Note that these precautions apply only to this product. Refer to the user's manual of the CPU module for
the PLC system safety precautions.
In this manual, the safety instructions are ranked as "DANGER" and "CAUTION".
DANGER
Indicates that incorrect handling may cause hazardous conditions,
resulting in death or severe injury.
CAUTION
Indicates that incorrect handling may cause hazardous conditions,
resulting in minor or moderate injury or property damage.
Note that failure to observe the ! CAUTION level instructions may lead to serious results depending on
the circumstances.
Be sure to observe the instructions of both levels to ensure personal safety.
Please keep this manual in an accessible place and be sure to forward it to the end user.
[Design Instructions]
!
DANGER
• When controlling a running PLC (e.g. modifying data), establish an interlock circuit in a
sequence program for safety of the overall system.
Also, be sure to read the manual carefully and ensure safety before making controls such as
change of operation status.
Especially, when controlling a PLC from a remote location via the Internet, problems on the PLC
side may not be dealt with promptly due to abnormal data communication.
Establish an interlock circuit in a sequence program.
• For the operation status of each station in the event of a communication error in the data link,
see the manual for each data link.
Failure to do so can cause an accident due to false output or malfunction.
• When the e-mail function is utilized, it may take time to send e-mail or is disabled depending on
the status of the send server, transmission path, receive server and/or receive device.
To ensure the safety of the PLC system, provide calling circuits using lamps and buzzers.
• Provide a safety circuit outside the PLC so that safety of the whole system can be ensured
against an external power failure or PLC failure.
Failure to do so may cause an accident due to false output or malfunction.
• If it is necessary to ensure the security of the PLC system against unauthorized and illegal
access from external devices via the Internet, appropriate measures (firewall, etc.) must be
taken by the user.
A-1
A-1