Download amacomflip 2 diskusermanual

F
8
L
I
P
2
D
I
S
K
A
M
A
C
O
M
USB
– WINDOWS® ME/2000 AND XP
FIREWIRE®
– WINDOWS® 98SE/ME/2000 AND XP
1) Setup your hardware by following the
instructions under the ‘Hardware Setup’
section of this manual.
1) Setup your hardware by following the
instructions under the ‘Hardware Setup’
section of this manual.
2) Turn on your computer and wait for
Windows® to finish loading. You must log in
as a user with Administrator privileges to
install the Flip2disk™ device drivers (2000
and XP only).
2) Turn on your computer and wait for
Windows® to finish loading. You must log in
as a user with Administrator privileges to
install the Flip2disk™ device drivers (2000
and XP only).
3) Plug the USB cable into the USB port on your
computer or hub, ensuring that it is pushed
firmly in.
3) Plug the Firewire® cable into the Firewire®
port on your computer or hub, ensuring that it
is pushed firmly in.
4) Windows will detect the insertion of the USB
cable and install the device driver
automatically.
4) Windows will detect the insertion of the
Firewire® cable and install the device driver
automatically.
USB
– MAC® OS 8.6 AND ABOVE
FIREWIRE®
– MAC® OS 8.6 AND ABOVE
1) Setup your hardware by following the
instructions under the ‘Hardware Setup’
section of this manual.
1) Setup your hardware by following the
instructions under the ‘Hardware Setup’
section of this manual.
2) Turn on your computer and wait for Mac®
OS to finish loading.
2) Turn on your computer and wait for Mac®
OS to finish loading.
3) Insert the Amacom® software CD into your
CD-Rom drive. When the CD is mounted
double click on the icon on your desktop.
3) Insert the Amacom® software CD into your
CD-Rom drive. When the CD is mounted
double click on the icon on your desktop.
4) From the window that appears double click
on the ‘Drivers’ folder followed by the ‘USB’
folder. Double click on the installer icon and
follow the instructions on screen to install the
extensions to your system.
4) From the window that appears double click
on the ‘Drivers’ folder followed by the
‘Firewire’ folder. Double click on the installer
icon and follow the instructions on screen to
install the extensions to your system.
5) When the installer is finished you will need to
restart your Mac® for the extensions to be
enabled.
5) When the installer is finished you will need to
restart your Mac® for the extensions to be
enabled.
6) Once your Mac® has restarted plug the USB
cable into the USB port on your computer or
hub, ensuring that it is pushed firmly in.
6) Once your Mac® has restarted plug the
Firewire® cable into the Firewire® port on
your computer or hub, ensuring that it is
pushed firmly in.