Download User Manual

appears in the license field.
Entered license key is shown for key activated licenses.
BACKUP ALARM
This section keeps the information about when to send “low backup space” alarm and
according which drive.
SERVICE CONTROL
Service Version: Installed VRX service version numbers.
SMDR Version: Installed SMDR module version number.
Running Since: Shows date and time information when VRX service is started to run.
Automatic Restart: This field is used to reset the VRX service automatically everyday at
preset time. This function is helpful to prevent possible blocking for the 7/24 running
computers. It is recommended to set the restart time one hour before the working time.
Service starts running when computer first starts up even if VRX client did not
open. Since there is no other control of the service, only way to restarting the service is
pressing the “Restart” button. Another way to restarting the service is restarting the computer.
After the service is restarted, the VRX client should be closed and reopened.
SMDR SETTINGS
In this group of settings, extension related data is entered in order to add extension numbers
correctly to the recordings made from CO line side.
Enable SMDR checkbox should be checked to let VRX client open extension related columns
on trace and records pages.
Extension Count field must be filled with the total extension number exist in PABX.
Used logical number should be entered to the First Extension into the field.
If there is special number used for the operator, it should be entered Operator field.
NOTE: SMDR feature can run properly only if VRX can retrieve TAPI information from PABX.
If needed, necessary licensing should be obtained from PABX service.
OPERATING MODE
Controls in this section are functional when optional announce card is installed in voice
recording device. It is used for recording and testing announces.
Normal Operation: This option should be selected for using announces.
Record Message: This option should be selected to record the “welcome” and “telesecretary”
announces.
Auto Answer Ring Count: This field determines how many ring burst will wait the system
before answering incoming call when using in answering machine mode.
TIME DEPENDENT RECORDING
One of recording modes can be selected from pull-down menu.
NONE: Time dependent recording feature is inactive. Recordings are made all the time.
VRX User Manual (v3.0 – r2)
Page: 22 / 48