Download Manual - Ambient

ACN-ML
Version 1.3 / 3.48
SYS MENU
The SYS menu lets you adjust OLED brightness, displays info about the
device and lets you reset the Lockit to factory defaults.
SYS > Display
Enter the configuration by pushing in the config switch
Adjust display brightness from 1 to 10 and push in to select value. The
curser will jump to the Auto-off settings to select the time out
Choices are: Never – 5 seconds – 30 seconds – 1 minute – 5 minutes.
SYS > INFO
Select INFO to display information about the ACN-ML:
Serial Number
Main firmware version
Mac address
SYS > Factory-Reset
Selecting yes and pressing the config switch restores factory defaults
to: JamTC Auto, Sync Off, TC 25 fps, ACN Off, Display brightness 3,
display auto-off 30 sec., TC-offset NULL.
20
©Ambient Recording GmbH 2015