Download Aviation icountPDZ2 User Manual

g
Software
Microsoft Windows® HyperTerminal connection
An alternative way of achieving communication with icountPDZ2 is to use the HyperTerminal
program supplied with Microsoft Windows (but not always installed on the PC or laptop’s hard
disk – check the installation disk, or contact your organisation’s IT department if the program is
not present). Please note that HyperTerminal is not supplied with Windows Vista™, but the
Parker Terminal utility can be used with this operating system.
The standard communication settings (used in STEP 4) are as follows:
Baud Rate
9600
Data bits
8
Parity
None
Stop bits
1
Flowcontrol
None
Step 2:
Select ‘HyperTerminal’.
(from All Programs
4 Accessories
4 Communications
4 HyperTerminal)
Step 1:
Click ‘Start’
Step 3:
Click and type the connection
name you wish to use to identify
this session
26
Parker Hannifin icountPDZ2