Download Manual
Transcript
4. Specify the password with which events data will be decrypted and click Next to proceed to the data filter dialog. NOTE: Use the same password used for the encryption of your events data. 5. Configure the data filters that will be applied against the imported file and click Next to continue. NOTE 1: Use data filters to define which events will be imported into the main database. NOTE 2: For more information on how to configure filter conditions, refer to the „Configuring data filter conditions„ section in this chapter. 6. Specify whether the maintenance job should be scheduled or executed immediately. 7. Click on Finish to finalize your settings. NOTE: GFI EventsManager will change the file extension of all successfully imported files from .EXP to .IMP. 12.8 Delete data To remove events from the main database: 1. From the „New job wizard‟ dialog, select the Delete data option. NOTE: Important events data should be backed up through the „Move to database‟ or „Export to file‟ maintenance jobs. Failure to do this means that deleted records can NOT be recovered. Screenshot 143 - New job wizard: Delete data 2. Specify whether events will be deleted from the Main database or from the Backup database. 3. Specify the frequency in hours/days at which events will be deleted from the main/backup database. 4. Click Next to bring up the data filter conditions dialog. 138 Database Operations GFI EventsManager user manual