Download Francis - Thesis 2008
Transcript
between the first and second amplifier stages is used to decrease the amplified spontaneous emission (ASE) background [4]. Further Faraday isolators are installed to prevent any feedback from amplification stages located further down the beam path. After exiting the 6 mm amplification stages the beam profile has a characteristic ring structure. This is removed by a second spatial filter positioned after the second amplification stage. The pulses then pass through the third and fourth amplifier stages, each of which contain a 9 mm Nd:YAG rod. Infra-red laser pulses exiting the fourth amplifier stage have a pulse energy of up to 3 J at a wavelength of 1064 nm. The harmonic generator consists of a 13 mm long KTP (potassium titanyl phosphate) crystal and is used to double the frequency of the laser pulses. Green light with a wavelength of 532 nm exits the harmonic generator. The crystal has a maximum efficiency of over 50% and therefore can provide more than 1.5 J of green laser light. A photograph of the pulsed laser system indicating the locations of some of the significant components is shown in figure 4.3. The dimensions of the laser optics bench are approximately 2.5 x 0.75 m. Figure 4.3 Photograph showing the arrangement of components within the pulsed laser system. The bench dimensions are approximately 2.5 x 0.75 m. The minimum pulse width of this custom designed Nd:YAG laser system is 150 ns. This is significantly longer than the pulse width of conventional Nd:YAG lasers which is typically 10 ns or so. The advantage of having a long pulse width is that the linewidth of the laser is reduced relative to the conventional Nd:YAG laser. This is significant in applications that require a narrow linewidth, such as planar Doppler velocimetry (PDV) [5]. Another advantage of this laser system is that it has no external cavity. The only laser cavity is within the seed laser. The lack of an external cavity means that the laser does not suffer from the effects of spatial hole burning. This is a phenomenon caused by interference of counter-propagating light beams with the same polarization. This produces a standing wave pattern, the result of 76