Download ADP/ADS Series Two dry pumps

B 101
J 3 remote control plug connection
(ADP 122 L)
Study the preliminary precautions (see B 00)
When units containing control circuits are equipped with
dry contact outputs, it is the responsibility of the customer
to use these outputs in compliance with safety standards.
The remote control function allows:
• Remote control of pumping functions “START/STOP/PURGE”,
“Roots“ and “Inlet valve“.
• Remote monitoring of parameters through auxialiary dry
contacts (50V - 1A). These contacts can be used to control
automatic functions.
Location of J 3
remote control
connector
The remote control connection is done via the “J 3“ connector,
located on the rear panel of pump.
Edition 01 - November 98
J3
Female Sub D - 50 pins
connector
In local mode, the pump can run only if the cover plug
(delivered with the pump) is fitted on “J 3” connector.
Alcatel Vacuum Technology France - User’s Manual ADP/ADS SERIES TWO
1/2