Download Virtual Voice Processor III

Maintenance of your Processor.
-
Use a cloth that is dry or slightly moist to clean all metallic parts.
-
You can use a special glass cleaning product on the plastic protector of the
display.
-
To remove the dust from the ventilation system switch off and unplug the
processor then use a compressor to blow through the ventilation ducts at no
less than 15cm paying particular attention to the duct where the ventilator is
placed (to the left of the processor on 2U racks like the DVP and DBP7+4, and
to the right on IU racks like a DEP, DEP2 or 4 and VVP).
-
Wherever possible protect the equipment from dust or other dangerous
projectiles.
-
Should your processor have been exposed to fluids, smoke or dust it must be
thoroughly cleaned. However, your processor should not be opened unless
you have the authorization from a technician from IDT Sound Processing
Corporation without which your guarantee can be cancelled. Call IDT Sound
Processing Corporation in any such case. Depending on the damage we can
help you clean the processor or have the equipment returned to the company
for a full revision.
Storing your equipment for a long period without use
When you don’t use your processor for a long period please store it in its original
packaging in a temperate and dry area. We advise you to use the plastic
protective bag to avoid any possible corrosion. We advise you to repack the
processor exactly as you received it ensuring that you will find it in perfect
working condition.
4