Download Manual - Korenix

Transcript
JetWave 2310/2311 Series User Manual
please find the SIM card format carry board for the SIM socket.
The example of the standard SIM card.
The Major type SIM card.
The micro-SIM carry board. Put the Micro-SIM card to the standard SIM
card type carry board and plug into the system.
Note: While you prepare to plug in the SIM card, please remember to power off the system first.
This is a MUST step, it allows the JetWave 2310 system to detect the SIM card while booting
up.
Note: The SIM 1 is the default SIM socket.
2.3.4
Diag. Console
There is one 3-pin console reserved for engineering diagnostic in the
bottom of the device. The 3 pin indicates below pin assignment of the
typical RS-232 serial connection. You can wire the cable by yourself or purchase from Korenix.
Pin 1
Pin 2
Pin 3
Diag. Socket
GND(Ground)
Receive Data (RD)
Transmit Date (TD)
D-Sub 9
GND(Ground)
Transmit Date (TD)
Receive Data (RD)
Page 11