Download R&S FSH Operating Manual

R&S FSH
Digital Modulation Analyzer
Measurements on CDMA2000 Signals
9.5.3.3
Channel Table
The channel table is made up out of seven columns and a number of rows that depend
on the number of channels.
The columns show the following information.
Channel Type
Type of channel. (---) indicates an inactive channel. The following channels can be
detected:
Channel Type
Channel
F-PICH
Pilot channel (displayed as PICH)
F-SYNC
Synchronization channel (displayed as SYNC)
All other channel types are not automatically differentiated and named as “CHAN”.
Walsh Ch.SF
Channel number including the spreading factor (in the form <Channel>.<SF>).
Symb. Rate (ksps)
Symbol rate that the channel is transmitted with (9.6 ksps to 307.2 ksps).
RC
Radio configuration. The RC is a predefined physical layer configuration for the
transmit signal. It defines the physical channel configuration based upon a specific
channel data rate. In the current CDMA2000 Standard nine RCs are defined in the
forward link.
Status
Status display. Unassigned codes are identified as inactive channels.
Power Abs (dBm)
Absolute power of the channel in dBm.
Power Rel to PICH [Total] (dB)
Relative power of the channel in dB. The reference channel is the PICH or the total
signal, depending on the reference power you have selected.
Operating Manual 1173.6275.12 - 24
244