1
Download media:scape Table
Transcript
Ten Tips: How to Get the Most Out of This Book .. . .. Refer to the specifying .. pages for all the informa. .. tion needed to order a prod.. uct. Each product specifying . page contains a variety of .. elements to help you com.. plete a specification: .. • Product Drawing .. • Standard Includes . .. • Required to Specify .. • Options . • Related Products .. • Specification Information .. • Dimensions . .. • Style Number .. • Price . .. .. Standard Includes . (under the dark grey band) . .. provides a list of what .. comes standard with the Specification . product. Information (under the .. light grey band) provides .. product dimensions, style . Product Drawing . numbers, and prices for the . shows you what the Required to Specify . standard product and any .. product looks like. (under the dark grey band) surface material choices that . itemizes the information that .. are available. you must provide to order .. the standard product and the .. preferred sequence for . .. specification. .. . Wood Veneer Rectangular Worksurfaces .. .. . .. .. .. .. .. .. .. .. .. . . .. .. .. .. .. .. .. .. .. .. .. .. . . . . . . .. . .. .. .. . .. .. . .. .. .. . .. .. . .. .. ... ... ... ... ... ... . .. .. . .. .. .. .. .. Options Related Products . (under the black band) lists provide specification .. all the options that apply to information for products .. the product, their price, and that are directly related. . .. what is required to specify. .. . .. .. . .. Tip 5 Wood Veneer Worksurfaces Standard Includes 20"D Need help? Product details, page 000 Required to Specify • Worksurface: wood veneer Tip: When selecting fieldinstalled keying options, you must still include a lock color specification as part of the worksurface specification, if different from the standard.This will ensure that the lock face ring which is part of the worksurface will be the color that you want. Tip: Pedestals and center drawers may block access to grommets. Surface Materials • Customiz stain on wood veneer worksurface and wood edge profile Lock and Keying Lock, keyed randomly • Available only on worksurfaces with – Square profile (Q) – Radius profile (R) Required to Specify Prices at right Specify with Customiz stain. See Surface Materials Reference Manual. +$110 Add suffix L to style number. Tip: 9250 Ember Chrome lock is standard on veneer worksurface. If you want an alternative lock color, use the option below. Tip: If a plastic color number is not specified for a grommet or cord catcher with color choices, 6000 Black plastic will be provided. +$ 21 each 4"-square grommets • Centered along back edge of worksurface that is 25"D or deeper: black plastic only • Left- and right-hand side of worksurface that is 25"D or deeper: black plastic only Cord catcher • Available on 30"D and 35"D worksurfaces that are 45"W or wider: plastic Edge Profile Location Tip: On a wood veneer rectangular worksurface, the bullnose (B) profile is not available. Page 000 252 Supports Rear left: E91RL4 and color number. Rear right: E91RR6 and color number. Rear center: E91RC1 and color number. Center left: E91CL9 and color number. Center right: E91CR1 and color number. Center center: E91CC6 and color number. Front left: E91FL8 and color number. Front right: E91FR0 and color number. Front center: E91FC5 and color number. +$ 17 Specify with WWTPC. +$ 34 Specify with WWTPLR. +$230 Related • Articulated keyboard shelf Products • Worksurface wiring & cabling (ordered separately) Profile W Customiz Stain $116 $16 30" EEW2030W $ 86 $112 35" EEW2035W $ 99 $129 $134 $19 36" EEW2036W $102 $133 $138 $20 42" EEW2042W $141 $183 $190 $23 45" EEW2045W $149 $194 $201 $26 60" EEW2060W $220 $286 $297 $31 65" EEW2065W $311 $404 $420 $36 70" EEW2070W $264 $343 $356 $36 75" EEW2075W $284 $369 $383 $38 90" EEW2090W $347 $451 $468 $47 30" EEW2530W $133 $173 $180 $20 35" EEW2535W $154 $200 $208 36" EEW2536W $158 $205 $213 42" EEW2542W $224 $291 $302 $29 45" EEW2545W $239 $311 $323 $31 60" EEW2560W $348 $452 $470 Square Profile (Standard) R Radius Profile C Concave Profile G Groove Profile M 65" EEW2565W $449 $584 $606 70" EEW2570W $419 $545 $566 $46 75" EEW2575W $453 $589 $612 $49 90" EEW2590W $558 $725 $753 Medieval Profile Notched Profile $59 $162 $211 $219 $23 $244 $254 $26 36" EEW3036W $194 $252 $262 $27 42" EEW3042W $277 $360 $374 $30 45" EEW3045W $296 $385 $400 $33 60" EEW3060W $428 $556 $578 $47 65" EEW3065W $536 $697 $724 $54 70" EEW3070W $517 $672 $698 $54 Pages 000–000 75" EEW3075W $560 $728 $756 $59 Pages 000–000 Pages 000–000 90" EEW3090W $693 $901 $936 $71 70" EEW3570W $633 $823 $855 $68 75" EEW3575W $687 $893 $927 $71 Transitional Profile • Customiz stain on wood veneer worksurface and wood edge profile Tip: When selecting fieldinstalled keying options, you must still include a lock color specification as part of the worksurface specification, if different from the standard.This will ensure that the lock face ring which is part of the worksurface will be the color that you want. Lock and Keying Lock, keyed randomly • Available only on worksurfaces with – Square profile (Q) – Radius profile (R) Tip: Pedestals and center Cable Price Prices +$110 Alternative lock color on worksurfac • Polished Chrome No cos • Antique Bronze No cos Keying • Factory-installed keying options • Field-installed keying options Three-piece grommets Italic typeface on specifying pages usually identifies wording that you should use in your order. Tip 7 .. .. .. .. .. .. .. . .. .. .. .. .. . Wiring & Cabling Cable-management choices to allow wires and cables to pass through worksurface include three-piece grommets, 4"-square grommets, continuous channel grommet, and cord catcher. Tip: You can specify only one type of cable-management option on a single worksurface. .. .. .. .. .. . .. .. .. .. .. . . .. . Watch for tips throughout the text that give you explanations and helpful instructions. Tip 8 $46 $188 35" T Options Surface Materials $38 EEW3030W N • Worksurface: wood veneer $25 Edge Profiles Q Need help? Product details, page 000 $23 EEW3035W Specify with E91C26 and select plastic color number. • Ordered separately 20"D •Options (Add $ to Base Price) Profile C, G, M, N, and T 30" Specify with WWTPF. +$ 75 •Base Prices 35" 30" Channel grommet • Available on back of worksurfaces that are 25"D or deeper: black plastic only Tip: The edge profiles for wood veneer rectangular worksurfaces are wood veneer (Q and R) and wood (C, G, M, N, T, and W). 20" 25" Three-piece grommets • Available on all worksurface depths: plastic •Style Number Profile Q and R Page 000 Page 000 Tip: You can specify only one type of cable-management option on a worksurface. Tip: Your specification is not complete until you add a suffix to define the worksurface’s edge profile. • Dimensions D W Alternative lock color on worksurface with locks • Polished Chrome No cost Specify with 9201 Polished Chrome. • Antique Bronze No cost Specify with 9230 Antique Bronze. Cable Management Pages 000–000 Standard Includes Wood Veneer Worksurfaces Price Keying • Factory-installed keying options • Field-installed keying options Wood Veneer Rectangular Worksurfaces Specification Information 1 Style number with appropriate edge-profile suffix See edge-profile suffixes at bottom of page. 2 Wood veneer color number for worksurface 3 Options, if selected (see below) See Surface Materials, page 000. Options Tip 6 Worksurfaces .. . .. .. . .. .. . .. .. .. .. . .. .. . .. .. . .. .. . .. .. . . .. .. . .. .. . .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .. . .. .. . .. .. .. . .. .. . .. .. . .. .. . .. .. .. .. .. . .. .. . .. .. . .. .. . .. Tip: 35"D worksurfaces must be used in a desk shell buildup with end panels or in a panel-supported application with end support brackets or a 27"D pedestal used for support. W Waterfall Profile Elective Elements Learn what you cannot do by looking for drawings crossed out with an “X.” 252 Specification Guide Tip 9 Use the surface materials listings in the Surface Materials section of this book to find surface material color numbers. cPage 143 .. . .. .. . .. .. . .. .. .. .. . .. .. . .. .. . .. .. . .. .. . . .. .. . .. .. . .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .. . .. .. . .. .. .. . .. .. . .. .. . .. .. . .. .. .. .. .. . .. .. . .. .. . .. .. . .. Tip 10 Style Number Page 2256-P 308 32WCP 265 4942 308 87-7102002 331 87-7102003 331 88-PS 194 Refer to the style number index when you know a style number and you need to find the page that has more details about the product. cPage 154 3 Integrated Technologies Specification Guide April 2014 .. . .. .. . .. .. . .. .. .. .. . .. .. . .. .. . .. .. . .. .. . . .. .. . .. .. . .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .. . .. .. . .. .. .. . .. .. . .. .. . .. .. . .. .. .. .. .. . .. .. . .. .. . .. .. . ..
