Download Client User Manual

Card Information
NOTE: Both the Card Information and Security sections MUST be filled in before a card will
work in the Access Control system. They can be filled in by different users with different
security level at different times but the card will not work until both sections are filled out.
This area allows for the creation of a card associated with the selected entity. The Technology
field contains the available technologies that have been set to be associated with the selected
entity type in the BadgePass Management Console->Access Control->Card Options (ex. Prox,
Magnetic Stripe, MOCA). The Badge Number field contains the actual data on the card that is
used to authenticate and authorize the associated entity in Access Control. The Pin Number
field contains a pin code that can be used in substitution or addition to the entity card.
Obviously, the pin number can only be used if you have an input device that supports pin codes.
The Active and Inactive radio buttons determines whether the current card is active in the
system. The New Card button is to create a brand new card for the associated entity.