Download Manual - Hawk

2.2 The USB function
I.
Using the USB port
Before using the USB function, the user
has to remove the cover of the dome. 1)
Loosen the screws holding the camera
mount and then 2) carefully lift the cover
up. 3) The USB port is in the rear of the
lens (see the picture →).
II.
Connecting with a PC
By connecting the IP Camera with a PC
via
the
USB
Configuration
connector,
window
will
the
show
USB
up
automatically on the PC screen as below.
Network
Setting
PPPoE
Setting
DHCP ON
DHCP OFF
NOTE: You can click the “Launch” button to link to the home page of the device.
WARNING: After changing the settings, please click the “Apply” button. All of the
options will be effective after removing the USB connector.
7