Download MS-3 Laser Scanner User`s Manual

MS-3 Laser E.book Page 2 Monday, August 30, 2004 11:09 AM
Communications by ESP
Communications by ESP
Click this button to bring up
the Communications menu.
To change a setting,
double-click the setting and use your cursor to scroll through
the options.
To open nested options,
single-click the +.
Note: You can learn the current setting of any parameter by inserting a question mark
after the number, as in <K100?> To see all “K” commands, send <K?>.
Communications By Serial Command
Command Title
Password Status
Password Entry, Change
Host Port Parameters
Host Protocol
Host RS422 Status
Aux Port Parameters
Preamble
Postamble
LRC Status
Intercharacter Delay
3-2
Format
<K732,status>
<K733password,new password>
<K100,baud,parity,stop bits,data bits>
<K140,protocol>
<K102,status>
<K101,aux port mode,baud rate,parity,stop bits,data
bits,daisy chain status,daisy chain ID>
<K141,preambole status,preamble>
<K142,postamble status,postamble>
<K145,status>
<K144,intercharacter delay>
MS-3 Laser Scanner User’s Manual