Download Nipple Chucks / Adapters
Transcript
Model 918-I Roll Groover TheRIDGIDModel918-IRollGroovingMachineiscapableofgrooving1"to8"Schedule40 and1"to12"Schedule10pipefasterthananyrollgroovingmachineinitsclass.Poweredby a1.2HPuniversalmotorandheavydutytransmission,theModel918-Iproduceshighquality groovesconsistentlyandeffortlessly. Itcomesstandardwitharuggedwheelstandbuiltformobilityintheshopwithoutcompromisingstability.Thestand’strayistoughenoughtosupport200lbs.TheModel918-Iusesa custom-designed,two-stagehydraulicpumpthatminimizespipeflare,operatorfatigueand hydraulicfluidleaks. Features • Fastestrollgroovetimeinitsclass.(SeeRollGrooveTimechartbelow). • Offersmaximumversatilityinrollgroovingcapacities(seespecificationsbelow). • Customengineered2-stage,15-tonhydraulicpumpandrameasesgroovingand reducesflareandoperator’sfatigue. • Producesconsistent,highqualityrollgrooves. • 115VapprovedbyCSAtoCSAandULstandards. Specifications • Capacity –1"-12"Schedule10steel. –1"-8"Schedule40steel. –2"-6"copper(TypesK,L,M,DWV). –2½"-6"Schedule80PVC. • Weight:185lbs./84.1kg. • Motor:Universal1⁄2HP,115V,60Hz. • MotorControl:On/OffHeavy-DutywithFootSwitch. • RPM:45(noload). ROLL GROOVE TIME COMP. .75 HP GROOVER TIME TO GROOVE 100 SEC 75 SEC RIDGID 1.2 HP 918-1 50 SEC Standard Equipment • One2"-6"Schedule10/40RollSet. • One8"-12"Schedule10(8"Schedule40)RollSet. • OneToolforRollSetChangeout. • OneCarryCaseforRollSets. • OneHeavy-DutyWheelStandwithTray. • OneFootSwitch. • One1"-12"StabilizerforGroovingNipples. COMP. 25 RIDGID .75 HP SEC 1.2 HP GROOVER 918-1 0 SEC Ordering Information 2’’ SCHEDULE 10 6’’ SCHEDULE 40 PIPE SIZE Catalog No. Model No. 64977 65902 Accessories 48405 48407 918-I 918-I – – 48412 – 48417 59992 76822 76827 – – – – Description Weight lb. kg RollGroovingMachineComplete.115v RollGroovingMachineComplete.230v(ExportOnly) 185 185 84.1 84.1 RollSetfor8"-12"Sch10(8"Sch40)WithCarryCase RollSetfor1¼"-1½"Sch10/40WithCarryCase RollSetfor1"Sch10/40and1¼"-1½"Sch10/40With CarryCase RollSetfor2"-6"Copper 2½"-12"StabilizerforGroovingNipples EnglishDiameterTape MetricDiameterTape 18 10 8.2 4.5 20 9.0 10 11 4.5 5.0 0.1 0.1 1⁄2 1⁄2 Note: A Roll Set consists of a Groove Roll and a Drive Roll. Note: Do not use to groove 8" schedule 40 steel pipe harder than 150 Brinnel. For pipe stands, see page 2.4. 5.7