Download AlterPath KVM/net Manual

Transcript
4: KVM/net Operation
Adjusting Screen Brightness and Contrast
To adjust screen brightness, press the video control key sequence (Ctrl-K
followed by the V key, default).
Depending on which window was accessed last, the system will display either
one of the following overlaying windows:
•
•
Automatic (Video) Control Adjustment
Manual Brightness and Contrast Control
Automatic (Video) Control Adjustment
The Automatic Video Adjustment window is used to control the video signal
input level to the KVM/net. This is used to compensate for the differences in
video signal levels from the computers.
In the Automatic Control screen, press the <Tab> key to move from the
Adjustment field to the Exit/Auto/Manual buttons. Once you are in one of
the buttons, select the right or left arrows to move from one button to another.
4-14
AlterPath KVM/net Manual