Download RISCO ReaderKEY2 User Manual

17
Last ten records
To read the last ten records in a RediSAFE, do the following:
1. Press the red 0 button for one second to activate your
ReaderKEY2.
2. Enter your PIN, then press 3 at the Main menu (Figure 1
on page 6).
3. Press 2 to scroll through the menu options. In the Read
prior 10 records menu (Figure 9), press 3.
Figure 9. Read Prior 10 Records screen
3=READ PRIOR
10 RECORDS
4. Place the ReaderKEY2 lens against the lens on the
front of the RediSAFE, then press 3 to begin the reading
process. You must hold your ReaderKEY2 lens against
the RediSAFE lens for 10 to 15 seconds. You will hear
an acknowledge tone when the read is complete.
5. The Next screen/next record menu displays (Figure 10).
Press 2 to view the next screen; press 3 to view the next
activity record.
Figure 10. Next screen/next record screen
2=NEXT SCRN
3=NEXT REC