Download ML67Q5260 - Digi-Key

Transcript
FEDL67Q5260-02
ML67Q5260
SPI Access Timing
- Characteristics of master mode timing
Parameter
Symbol
Data delay time (output)
Data setup time (input)
Data hold time (input)
SPInSSN-SPInSCK lead time
SPInSCK-SPInSSN lag time
tDD
tSD
tHD
Condition
CL = 30 pF
tLEAD
tLAG
(VDD_CORE = 1.62 to 1.98 V, VDD_IO = 3.0 to 3.6 V, Ta = 40 to 85C)
Min.
Typ.
Max.
Unit
—
25
0 (*1)
0.5*tSCK 15
0.5*tSCK 15
—
—
—
—
—
25
—
—
0.5*tSCK 15
0.5*tSCK 15
ns
ns
ns
(*2)
ns
(*2)
ns
* 1: Although actual values may become negative depending on the external load, input the serial data so that the data hold time
can be guaranteed.
* 2: tSCK is the cycle time of the serial clock for SPI transferring which is obtained by dividing the frequency of the bus clock,
whose cycle time is tBUSCLK.
SPI master mode timing (CPHA = 0)
SPInSSN
(Output)
tLEAD
tLAG
tSCK
SPInSCK
(CPOL=0, Output)
SPInSCK
(CPOL=1, Output)
tSD
SPInMISO
(Input)
tHD
LSB
MSB
tDD
tDD
SPInMOSI
(Output)
LSB
MSB
*n:0,1
SPI master mode timing (CPHA = 1)
SPInSSN
(Output)
tLEAD
tSCK
tLAG
SPInSCK
(CPOL=0, Output)
SPInSCK
(CPOL=1, Output)
SPInMISO
(Input)
SPInMOSI
(Output)
tSD
tHD
LSB
MSB
tDD
LSB
MSB
*n:0,1
14/22