Download User`s Manual

Repair and Maintenance
The PVMate inverter contains no user serviceable parts, except for the fan,
the PV string fuses and the GFDI fuse. Only MOTECH-trained staff is
authorized to carry out internal repair and maintenance of the unit. Please
return the device for repair and maintenance for faults caused by parts
other than the fan and the fuses described above. For maintenance and
replacement of the fuses, please refer to the section 5.4.
WARNING!
Not to make alterations or use tampering assembly in the
inverter without manufacturer’s authorization unless specified
elsewhere in this Manual. They may result in injury, electric
shock, or fire and void the warranty.
Wiring the inverter

Input/Output Terminals: Use wire size #10 AWG to #6 AWG , 90°C (194°F)
Copper Wire.

Reconfirm that all connections have been performed properly and all
screws are properly tightened.
WARNING!
All electrical installation and the wiring methods shall be done in
accordance with the local and National Electrical codes
ANSI/NFPA 70 and should follow the important safety
instructions in this manual.
WARNING!
Make sure that you use suitable connecting cables for both the
AC and DC wiring. The cable must be adequately dimensioned
and suitably inert to temperature fluctuation, UV radiation and
other possible hazards.