Download 3G Audio

20. Built-in effect signal output interface
Built-in effect output interface,such as mixer.
When exist signal output, no mic signal
output on L/R out.
21. S terminal wire control input
Insert S terminal, the remote controller is not
available.
22. Central volume adjust potentiometer
If the central channel output is available,
adjusting the potentiometer can change the
volume of central channel.
23. Subbass volume adjust potentiometer
If subbass output is available, adjus the
potentiometer can change the volume of
subbass.
24. Bass output hi-frequency cut point is adjustable
from 80Hz to 250Hz.
16. Switch of AUX2 sensitivity
Set assistant audio signal test and
sensitivity when input switch to assistant
signal source.
when signal input on AUX2, switch is
available for Low/middle/High
17. BGM (background music)input voltage
Level control potentiometer adjust the
potentiometer ensure the BGM on
optimum situation.
18. Video input
Choose one video signal, three way output,
can connect three monitors, but not affect
the color.
19. External signal input interface
Input interface of external sets, such as mixer.
when exist signal input,MIC1/MIC2/MIC3
is not available.
SYSTEM SCHEMATIC DIAGRAM
AUX1
AUX1
VIDEO
INPUTS
MONITOR1
AUX2
MONITOR2
AUX2
VIDEO
OUTPUTS
MONITOR3
BGV
BGV
MIC VOL. 1
C-OUT
MIC1
MIC VOL. 2
MIC
INPUTS
MIC2
MIC VOL. 3
MIC MASTER VOL.
MIC3
AUX1
AUX1
AUDIO
INPUTS
AUDIO OUTPUTS
MUSIC VOL.
AUX2
L-OUT
AUX2
R-OUT
BGM
BGM
SW-OUT
PRE-OUT
5