Download HTR-5960

Transcript
REMOTE CONTROL FEATURES
■ Setting remote control TUNER ID library
codes
Setting library codes
You can operate multiple YAMAHA receivers or
amplifiers in the same room with the supplied remote
control simultaneously. Set the appropriate library code to
select and operate the desired component with the
supplied remote control.
Select one of the following codes to set the remote control
TUNER ID library code for the component you want to
use.
1
■ Setting remote control AMP ID library
codes
Press TUNER to select “TUNER” as the input
source.
TUNER
Select one of the following codes to set the remote control
AMP ID library code for the component you want to use.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
TRANSMIT
CODE SET
TRANSMIT
CODE SET
Flashes
Flashes
2
Press the numeric buttons to enter the code
number “00001” or “00002”.
The TRANSMIT indicator on the remote control
flashes twice, and the AMP ID library code is
changed.
3
Press the numeric buttons to enter the code
number “81916” or “81917”.
The TRANSMIT indicator on the remote control
flashes twice, and the TUNER ID library code is
changed.
STEREO
MUSIC
ENTERTAIN
MOVIE
STEREO
MUSIC
ENTERTAIN
MOVIE
1
2
3
4
1
2
3
4
STANDARD
SELECT
STANDARD
SELECT
5
6
7
8
5
6
7
8
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
SPEAKERS
ENHANCER
NIGHT
STRAIGHT
9
0
9
0
EXTD SUR. PURE DIRECT
10
ENT.
TRANSMIT
Flashes
Function
00001
To operate this unit using
(initial setting) the default code.
00002
*1
*2
To operate this unit using
an alternative code.
10
ENT.
TRANSMIT
Flashes
EFFECT
EFFECT
AMP ID
library code
*1
EXTD SUR. PURE DIRECT
Remote
control AMP
ID *2
TUNER ID
library code
*1
ID1
(initial setting)
81916
To operate this unit using
(initial setting) the default code.
81917
ID2
The remote control setting
The setting of this unit (see page 98)
*1
*2
Function
To operate this unit using
an alternative code.
Remote
control
TUNER ID *2
ID1
(initial setting)
ID2
The remote control setting
The setting of this unit (see page 98)
Notes
Notes
• You need to set the corresponding remote control AMP ID
of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
• You need to set the corresponding remote control TUNER
ID of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
102