Download Nova Manual "Getting Started"

NOVA Getting started
The signals sampled during this procedure are:
•
•
•
•
•
Corrected time
Level
Time
WE(1).Current
Index
Note: the automatic current ranging option is not available during the chrono
methods measurement. This procedure uses the Autolab control command to set
the instrument high speed and in the 1 mA current range before the measurement
starts.
Figure 3.21 shows a measurement on the dummy cell (c) with the Autolab Chrono
amperometry fast procedure.
Figure 3.21 – The measured data obtained with the standard dummy cell (c) with the Chrono
amperometry fast procedure
Note: more information on time resolved measurements can be found in the
Chrono methods tutorial, available from the Help menu in NOVA.
143 | P a g e