Download DRM004/D: Digitally Addressable Lighting Interface

DALI Slave Unit
Upgrading the Software
The interrupt vector is cleared when other parts of the FLASH memory
are erased. Since the slave unit updates the contents of the FLASH
memory during execution it is necessary to protect the interrupt vector
area. After the code is replaced the memory position FF7E (FLASH
Block Protect Register) has to be set to FE.
Trimming of the internal clock has to be done as described in
3.6 Upgrading the Software. However, the cable should be connected
between JP1 on the DALI slave unit (see Appendix D. DALI Slave Unit
Schematic and Layout) and JP5 on the DALI master unit (see
Appendix D. DALI Slave Unit Schematic and Layout).
Digitally Addressable Lighting Interface (DALI) Unit
MOTOROLA
DALI Slave Unit
DRM004 — Rev. 3.0
61