Download Panoweaver 8 User Manual

39 / 132
Basic Steps:
1. Select an image and zoom it to proper size in Image Show and Operation Area.
2. Drag the yellow circle properly around the fisheye image in the panel to change
radius. Press Ctrl+Left Mouse Key to change center.
3. Adjust Center X, Center Y, Radius to locate the yellow circle around the fisheye
image, no more and no less. Center X stands for the x coordinates of the enclosing.
Center Y is the y coordinates of the enclosing, while Radius refers to the circle's
radius. Click , yellow circle moves up; click , yellow circle moves down; click ,
yellow circle moves left; click , yellow circle moves right; click , yellow circles
zooms in; click , yellow circle zooms out.
4. Generally, if a group of fisheye images are shot with the same equipment, the
setting parameters of one image are applicable to the other images. After you
adjust the yellow circle, you may select Apply to All Images to implement the
parameters to the other images.
Tip: If you want to use parameters of the latest fisheye image as initial value in new
image, please select Last Used in Advanced Settings. Panoweaver will apply the
parameters to current image. Usually, the default item is Auto-calculated, that is,
Panoweaver will select the location and size of yellow circle automatically whenever you
import fisheye images. For details, please refer to Advanced Settings.
Basic Steps before Stitching
General Steps Before Stitching
Special Steps Before Stitching
General Steps Before Stitching:
1. In Image Show and Operation Area, under Source Images Tab, select, delete and
rearrange the source images for a panorama.
Table of Content
www.easypano.com