Download R e c o rd

DVR Installation
4.1 Detect Installed Hard Disk
Push carrier body further into cartridge frame until fully inserted (Fig3)
After connecting the power, system will boot-up firmware,
date, video and detect installed hard disk. Master and Slave
hard-disk information will show up on monitor.
Please make reference to hard disk manual to configure hard
disk sequence. (Master or Slave)
Fig3
DVR System Boot
4. DVR System Boot
(HDD is recommend to be provided by user)
4.2 Main Screen
3.2 Connect Camera and Monitor
There are eight cameras input and two monitors output with BNC connector.
3.3 Connect Power Cord
Please use the power adapter supplied with DVR.
7
Firstly, start the DVR system. DVR will be sense of eight
cameras shown on the monitor.
Name:(CH1 CH8).
Bottom right'Date and Time shown on there. DVR is waiting
for key function, Press "
Menu" into DVR setup process.
8