Download USER`S MANUAL

BEFORE YOU START
NOTE:
Your Laundry Pure Unit was factory tested. It is normal for
some residual water to still remain in the unit as a result of
these tests.
1
Remove your new LaundryPure from its packaging.
Cut open the vacuum seal bag and inspect the unit
for any signs of shipping damage.
Remove cover from LaundryPure
2
Remove the two (2) cover screws located on the
bottom of the unit.
Screws
3
Remove the two (2) screws (not shown)
along the top of the LaundryPure.
4
To remove the cover, pull the top away from
the unit, then lift off the cover.
5