Download User manual

Instructions for the installer
8.3.2 Over built-in oven
If installed on top of an oven, the latter must be equipped with a cooling fan.
The distance between the induction hob and the kitchen furniture or other built in appliances must be
enough to ensure sufficient ventilation and air discharge.
Remove the front transverse strip (if necessary) on the unit to create an opening for the air flow of at
least 4 mm under the work surface across the full width of the appliance.
In any event, if installed above an oven, a dishwasher or a fridge, a space of at least 5 cm must be left
between the hob and the top of the appliance installed below.
opens only on bottom
opens on bottom and on rear
8.4 Ventilation
The illustrations below show two examples of installation suitable for proper ventilation and one example
of incorrect installation to be avoided.
Do not obstruct the ventilation grille in front of the product in any type of installation.
47