Download User Manual Tektronix Logic Analyzer Family Version 3.2 Software

Installing Software on the TLA 600 Series
9. Click default buttons to install the SU810 Video Driver.
10. When prompted to reboot, select Yes to restart your computer now.
11. Press the F2 function key before Windows loads to enter Setup.
12. In Setup select Advanced, Video Configuration, and Primary Video Adapter,
and then set the value to PCI.
13. Press the F10 function key to exit and save the settings.
14. Using the Windows Explorer, locate and execute:
D:\Drivers\TLA600\C&T 69000 video\w98600.exe
15. Click default buttons to install the C&T 69000 video driver.
16. When prompted to reboot, select No, I will restart my computer later.
Installing Audio, PCI, and Front Panel Drivers
To install the audio, PCI, and front panel drivers, complete the following steps:
1. Install the CD labeled “Disc1-Logic Analyzer Software.”
2. Using the Windows Explorer, locate and execute:
D:\Drivers\TLA600\Intel SU810 audio\setup.exe
3. Click default buttons to install the SU810 Audio driver.
4. When prompted to reboot, select No, I will restart my computer later.
5. On your desktop right click My Computer and select Properties from the
menu, and select the Device manager tab.
6. Select View devices by type.
7. Under Other Devices, right-click the first PCI Bridge icon and select
Properties. Verify that it is Hardware version 002.
8. Select the Driver tab and click Update Driver.
9. When the Update Device Driver Wizard appears, click Next.
10. Click Search for a better driver than the one your device is using now
(Recommended), and click Next.
11. Click only Specify a location, then browse to the location:
D:\Drivers\TLA600\PCI-VXI Bridge.
12. Click Next, Next, then click Finish to install the PCI-VXI driver.
2–16
Tektronix Logic Analyzer Family User Manual, Version 3.2 Software