Download PT-L592U Operating Instructions - Support
Transcript
Projector < Top and front> INPUT select button (page 18) This button is used to select the input signal source. POWER button (page 11) This button is used to turn projection of the picture on and off. ZOOM adjustment +/- buttons (page 16) MENU button (page 21) This button is used to turn display of These buttons are used to adjust the picture size. the menu screen on and off and to return display to the previous screen. Built-in speakers (page 20) These are built-in speakers which are capable of outputting stereo sound. Carrying handle Pull out the handle and hold it when transporting the projector. Left: <, Right: >) Down: Arrow buttons (Up: These buttons are used to select items from the menu screen and for changing setting values. FOCUS adjustment +/buttons (page 16) These buttons are used to adjust the picture focus. LENS SHIFT dial (page 15) Turning this dial moves the lens up and down. Use it to make fine adjustments to the lens position when setting up the projector. Remote control signal receptor (page 10) This receives the infrared signal transmissions from the remote control unit. Focus ring (page 16) This ring is used to adjust the image focus. Air outlet port Projection lens This lens enlarges the image and projects it onto the screen. Lens cap MAIN POWER switch (page 11) This switch turns the power supply to the projector on and off. Fuse holder This holds a 125 V AC, 8 A fuse. Power input socket (AC IN) The power cord which is supplied with the projector is connected here. TEMP indicator (page 38) This indicator illuminates or flashes as a warning if the temperature inside the projector reaches an abnormal level. LAMP indicator (page 38) This indicator illuminates when the useful life of the lamp is coming to an end, and it flashes when there is a problem with the lamp unit. Power indicator (STAND BY (R)/ON (G)) (page 11) This indicator illuminates red when the projector is in standby mode, green when the projector is on, and orange when in standby mode and the cooling fan is operating. -7-