Download User Manual

menu.
2.2.
Press [], [], [], or [] to select [Setting].
2.3.
Press [ENTER] key to enter.
2.4.
Press [] or [] to select [Control].
2.5.
Press [] to enter [Projector Type].
2.6.
Press [] or [] to select [LCD/DLP].
2.7.
Press [MENU] to exit.
7.21 I would like to resume the factory default settings
(Factory Reset)
7.21.1 Using OSD menu
1. Press [MENU] on the remote control or control panel to enter the setting
menu.
2. Press [], [], [], or [] to select [Setting].
3. Press [ENTER] key to enter.
4. Press [] or [] to select [Advanced] menu.
5. Press [] to select [Factory Reset].
6. Press [] or [] to select [Yes].
7. Press [ENTER] to activate.
7.21.2 Use Compound Key
1. Use the Control panel, and press [ENTER] + [MENU] simultaneously to
restore the initial value.
<Note> Before using the compound keys, please remove all VGA-IN devices.
7.22 I would like to change the splash screen
<Note> The splash file must be less than 5 MB and in JPEG format.
1.
Press [Menu] on the remote control or control panel to enter the setting
menu.
2.
Press [], [], [], or [] to select [Setting].
3.
Press [ENTER] key to enter.
4.
Press [] or [] to select [Advanced] menu.
5.
Press [] to select [Splash Screen Settings].
6.
Press [ENTER] key to enter.
7.
Press [] or [] to enter the [Power On Image Setting] menu and press []
or [] to select [Default/Custom].
繁體中文 - 31