Download WebRelay Users Manual

Revision 3.8
WebRelayTM Users Manual
Contents
Trademark and Copyright Information
Warranty
FCC Statement
Installation Guidelines (Read Before Installing)
Section 1: Introduction
1.1 Features
1.2 WebRelayTM Models Available
1.3 Connectors & Indicators
1.4 Example Configurations and Applications
1.4.1
1.4.2
1.4.3
1.4.4
1.4.5
1.4.6
1.4.7
Single WebRelayTM Device (IP Network Control Only)
Single WebRelayTM Device (Voltage and/or IP Network Control)
Dual WebRelayTM Devices (No Computer Required for Operation)
Multiple WebRelayTM Operation (No Computer Required for Operation)
WebRelayTM Used for Reboot (Wired in series with Power)
WebRelayTM Used for Reboot (Wired to Reset)
WebRelayTM Used for Reboot (Wired in parallel with Power Switch)
Section 2: Installation and Setup
2.1 Mounting
2.1.1 Wall Mounting
2.1.2 DIN-Rail Mounting
2.2 Connection
2.2.1
2.2.2
2.2.3
2.2.4
Power Supply Connection
Network Connection
Relay Connection
Optically-Isolated Input Connection
2.3 Establishing Communications for Setup
2.3.1 Option 1: Assign a temporary IP address to WebRelay TM
2.3.2 Option 2: Assign a temporary IP address to configuration computer
2.3.3 Open Configuration Web Page
2.4 Web-Based Setup
2.4.1 Main Setup Page
2.4.2 Network Setup Page
2.4.3 Password Setup Page
2.4.4 Relay/Input Setup Page
2.4.5 Control Page Setup (When Relay Mode is set to Standard)
2.4.6 Control Page Setup (When Relay Mode is set to Automatic Reboot)
Section 3: Operation
3.1 Browser Operation (Standard Relay Mode)
3.2 Browser Operation (Automatic Reboot Relay Mode)
3.3 XML Operation
3.3.1 state.xml
3.3.2 XML Control
3.3.3 GET Requests
3.4 Modbus Operation
Xytronix Research & Design, Inc.
page 1