Download View - The ECU+

9 Restoring Your Configuration Settings (Required)
Once you've updated your firmware and software to version 2.10, you'll need to restore your ECU+
head unit settings from the .ema file where the settings were saved to in step 6. Again, this is a
required step. To do so:
1. Connect your ECU+ black box to a laptop, and start up the (new version 2.10) ECU+ Win
software.
2. Use the Settings->ECU+ Head Unit menu item to bring up your current head unit settings.
They'll contain at least some garbage.
3. Click the Load button (available on any of the dialogs), and select the file:
pre-v210-settings.ema
Be sure all three of the checkboxes Import fuel maps, Import timing maps and Import other
parameters are checked.
Illustration 9 - Restoring your saved settings from disk
4. Click Ok to load the saved values into the laptop's memory, and Ok again to save the settings to
the ECU+ silver box head unit.
10 Wiring Changes
To take advantage of the new functionality in the ECU+ version 2.10 firmware, some changes to the
Page 12