Download Programmer Manual

Commands Listed in Alphabetical Order
TRIGger:A{:TRANsition|:RISEFall}:WHEn
Sets or returns whether to check for a transitioning signal that is faster or slower
than the specified delta time.
Group
Trigger
Syntax
TRIGger:A{:TRANsition|:RISEFall}:WHEn
{SLOWer|FASTer|EQual|UNEQual}
TRIGger:A{:TRANsition|:RISEFall}:WHEn?
Arguments
FASTer sets the trigger to occur when the signal transition time is faster than the
time set by TRIGger:A{TRAnsition|:RISEFall}:DELTatime.
SLOWer sets the trigger to occur when the signal transition time is slower than the
time set by.TRIGger:A{TRAnsition|:RISEFall}:DELTatime.
EQual sets the trigger to occur when the signal transition time is equal to the time
set by TRIGger:A{TRAnsition|:RISEFall}:DELTatime.
UNEQual sets the trigger to occur when the signal transition time is not equal to
the time set by TRIGger:A{TRAnsition|:RISEFall}:DELTatime.
Examples
TRIGGER:A:TRAnsITION:WHEN SLOWER sets the trigger to
occur when the signal transition time is slower than the time set
by.TRIGger:A{TRAnsition|:RISEFall}:DELTatime.
TRIGGER:A:TRAnsITION:WHEN? might return :TRIGGER:A:TRAnsITION:
WHEN FASTER
TRIGger:A:TYPe
Sets or returns the type of A trigger. The five types of triggers are of Edge,
Logic, Pulse, Serial, and Video. Logic and Pulse triggers contain classes. Logic
triggers consist of State, Pattern, and SetHold classes; Pulse triggers consist
of Runt, Width, and Transition logic classes. Once you have set the trigger
type, you may also need to identify the associated trigger class. For details on
selecting Logic and Pulse trigger classes, see TRIGger:A:LOGIc:CLAss and
TRIGger:A:PULse:CLAss respectively.
Group
Trigger
Syntax
TRIGger:A:TYPe {EDGe|LOGic|PULSe|BUS|VIDeo}
TRIGger:A:TYPe?
Tektronix 4000 Series Programmer Manual
2-355