Download TopSURV User`s Manual

TpSrv_um.book Page 6 Wednesday, October 29, 2008 2:46 PM
COGO
Calculator
A built-in calculator in TopSURV performs calculations and
conversions. To access the calculator, tap the Calculator icon
(Figure 10-6).
Figure 10-6. Calculator
TIP
To enter a calculated value to any entry field in
TopSURV, either press the F1 button on the
T
controller keyboard to start the calculator from this
field or tap the Calculator icon on the pop-up
keyboard for controllers with soft input panels.
1. Enter the entire equation in the Input field, then press the
equals [=] button to calculate the result.
2. The Result field shows calculation results. This field is also
used as the ‘y’ or ‘theta’ values for rectangular / polar
conversions.
3. Once equals is pressed, the previous result is moved up to the
Previous Result field. This field is also used as the ‘x’ or ‘r’
values for rectangular/polar conversions.
4. To perform calculations, use the following buttons:
• MC – tap to clear the memory.
10-6
TopSURV User’s Manual