Download ConneXium Ethernet Cabling System Managed Switch

Transcript
Traffic Control
Example of a
Multicast
Application
The cameras for machine surveillance normally transmit their images to monitors
located in the machine room and in the monitoring room. In an EMS IP transmission,
a camera sends its image data with a multicast address over the network.
To prevent the many images from slowing down the entire network, the EMS uses
the GMRP to distribute multicast address information. As a result, those images with
a multicast address are only distributed to those ports that are connected to the
associated monitors for surveillance.
The figure shows a multicast application example.
1st floor
2nd floor
Control room
Description of
IGMP Snooping
The Internet Group Management Protocol (IGMP) describes the distribution of
multicast information between routers and end devices on layer 3.
Routers with an active IGMP function periodically send queries to find out which IP
multicast group members are connected to the LAN.
Multicast group members reply with a report message. This report message
contains all parameters required by the IGMP. The router records the IP multicast
group address from the report message in its routing table. Then the router transfers
frames with this IP multicast group address in the target address field only in
accordance with the routing table.
92
31007122 8/2006