Download AS01023G-01, ECM2 with IEC61131-3 Functionality

Transcript
ECM2 User Manual Rev. 1.5
Figure 2-10 Digital Output
Below is an example of how to interface with the digital outputs for both the sinking and sourcing hardware
configurations. The digital I/O circuitry is again powered from an external +24-volt power source via the I/O
connector.
+24 V IN
+
24V GND
+
DIO1
DIO1
Figure 2-11Sinking Output
Figure 2-12 Sourcing Output
Page 20 of 121
© MKS Instruments CIT Products 2012, All rights reserved