Download MultiRAE User`s Guide - Enviro

MultiRAE User’s Guide
6 Modes Of Operation
The MultiRAE has two operation modes and two user modes.
6.1 Hygiene Operation Mode
Hygiene Mode provides continuous monitoring.
6.2 Search Operation Mode
Search Mode provides monitoring only when monitoring is turned on. This allows specific samples to be
taken at different times, rather than continuously.
6.3 Basic User Mode
In Basic User Mode, some restrictions are applied, including password protection that guards against
entering Programming Mode by unauthorized personnel.
6.4 Advanced User Mode
In Advanced User Mode, there are no access restrictions (you do not need a password), and MultiRAE
provides the indications and data you need most for typical monitoring applications.
7 Programming
The menu in Programming Mode is to adjust settings, calibrate sensors, and initiate communication with
a computer. It has the following submenus:






Calibration
Measurement
Alarms
Datalog
Wireless
Monitor
7.1 Enter Programming In Advanced Mode
1. To enter Programming Mode, press and hold [MODE] and [N/-] until you see the Calibration screen.
No password is necessary in Advanced Mode.
2. Press [N/-] to step through the programming screens.
To enter a menu and view or edit parameters in its submenus, press [Y/+].
20